No relevant products found.
No relevant pages found.

Linear Sliding Door

The linear sliding door can be built with our mesh and polycarbonate panels to fit your chosen machine guard system. Use the standard panel heights 2,050 mm or 1,250 mm in up to 6 widths. You can also combine the standard panels or order special width panels to create the required door blade size. The door is supplied as separate panels, posts, and door kit for assembly on site. The Linear sliding door runs on roller bearings at the top and bottom of the door panel, making it a very stable sliding door even for large door sizes. It creates a door opening with clear access in height, making it a good choice when you need access with forklifts for example. Depending on the risk assessment, you choose the preferred lock for your door. The Linear door can be equipped with the Troax Safe Lock which is compatible with many safety switches. The Linear sliding door is available in 5 widhts; 1,800 mm, 2,500 mm, 3,000 mm, 3,500 mm and 4,250 mm. The standard opening width is approximately 1,800-4,000 mm.

Facts

Art. Nr Components
36906440 Kit 6440 Guide Linear
36906450 Kit 6450 Guide Linear
36906460 Kit 6460 Reinforcement

Downloads

Name Type
Assembly instruction - Linear sliding door 60x40 MG 36906430.pdf
Type
Document
Download
Product sheet - LINEAR_SLIDING_DOOR_ENG.pdf
Type
Document
Download
Follow Me - Linear sliding door Kit Wire, 36906700.pdf
Type
Document
Download
Assembly instruction - Linear sliding door 80x80 MG, 36906430.pdf
Type
Document
Download
Assembly instruction - High Linear sliding door MG, 36906460.pdf
Type
Document
Download

Interactive 3d