No relevant products found.
No relevant pages found.

Carrier Sliding Door Single Rail x2

The Carrier sliding door with 2 single rails can be built from our mesh or polycarbonate panels to fit your chosen machine guard system. The door is built using the standard panel height of 2,050 mm by combining panels in up to 5 widths. The parallel door blades run in separate aluminum rails at the top and hook into each other when opened. The panels and posts together with the top rail and door kit are supplied separately for assembly on site. Choose either the 60x40 mm or 80x80 mm posts for your solution. Depending on the risk assessment, you choose the preferred lock for your door; Cylinder Lock or the Troax Safe Lock or any other type of handle solution with or without a safety switch. The standard opening width is approximately 1,180 mm-2,780 mm.

Facts

Art. Nr Components
36905610 Kit 5610 Carrier Singel

Downloads

Name Type
Product sheet - CARRIER SLIDING DOOR x2_ENG.pdf
Type
Document
Download
Assembly instruction - Carrier sliding door single rail x2 Kit 36905610.pdf
Type
Document
Download

Interactive 3d